When I checked, I found that squashfs is not recognised by linux!!! What should I do to make squashfs be recognised? Python rarfile package: fail to open files. 2. Some distributions ship images in squashfs format, especially for bootable ISOs. Describe the solution you'd like It would be great to have a native way to import this clean image into WSL using the --import command, without having to extract the squashfs to a directory, and then tar it. Describe alternatives you've considered 7-Zip is capable of opening squashfs images and extracting their files. I tested this on 7-Zip version 15.14 [64-bit] on Windows 10 with a squashfs image which uses xz compression. 7-Zip does not appear to list squashfs among the archive formats when creating an archive, so you'll need to look elsewhere if you want to generate a squashfs image 4. Copy openwrt-ramips-mt76x8-xiaomi_miwifi-3c-squashfs-sysupgrade.bin to /tmp in router using ftp. 5. İnstall Openwrt to OS1 and free OS2. mtd erase OS1 mtd erase OS2 mtd -r write /tmp/openwrt-ramips-mt76x8-xiaomi_miwifi-3c-squashfs-sysupgrade.bin OS1. Limitations: For the first install the image size needs to be less than 7733248 bits. Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimize data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. Squashfs is intended for general read-only filesystem Step 3. Set the default application to open SQUASHFS files to 7-Zip. After installing 7-Zip (the most recent version) make sure that it is set as the default application to open SQUASHFS files. The next step should pose no problems. The procedure is straightforward and largely system-independent. In code update mode, the squashfs image and white-listed files from the read-write filesystem are copied into RAM by the initramfs and used to assemble the root overlayfs instance, leaving the flash free to be modified by installing images at runtime. Adding RAM helped. It turned out that 1.5GB RAM is required for initial setup. And as @Gordster said I used "sda" instead of "vda" in anaconda-ks.cfg file. Thank you for you thorough answer. Vay Tiền Nhanh Chỉ Cần Cmnd Asideway.

how to open squashfs file